YaKai Plastics
Geocells
Geocell Factory Price Soil Stabilization Hdpe Paving Geo Grid Plastic Honeycomb Gravel Paver Geocell With Factory Price- MaterialHDPE
- Thickness textured: 1.5mm smooth: 1.1mm
- Cell depth50-75-100-150-200mm
- Weld spacing330-356-400-445-500-660-712mm
- colorcustom
- ApplicationsBase Stabilization/Slope Reinforcem/Channel Protectionent/Retaining Walls
Detailed Information
Geocells are made of original high-density polyethylene (HDPE) plastic and constitute a welded geocell system that forms a stable geocell wall structure, providing confinement support for slopes, bases, channels, and vertical applications. By dispersing loads over a larger area, the pressure borne by the geocell grid and the underlying base is significantly reduced. This allows for a reduction in structural thickness in base applications or an increase in the strength and integrity of reinforced structures. When using geocells, lower-quality fill materials can also be utilized because the quantity of geocell walls provides excellent distributed load support and helps retain soil particles in slope and channel applications.
When geocells are fixed together and placed on the surface of the subgrade, interconnected geocells expand and open up, allowing for the accommodation of various types of fill materials such as soil, aggregate, recycled materials, etc. These materials are then compacted to increase strength. Geocells provide higher performance for many different construction applications, allowing structures to be finer and providing additional reinforcement.
Applications
Base Stabilization
Slope Reinforcement
Channel Protection
Retaining WallsYaKai™ GeoCell is a confinement system that performs better than conventional crushed stone sections, and it provides an expedient construction technique for access roads over soft ground without being adversely affected by wet weather conditions. GeoCell can also be used to strengthen paved areas.
On slope applications, YaKai™ GeoCell can be filled with angular rock, concrete or with vegetated soil. The cells confine the infill material, creating a stable layer protecting the slope from erosion. GeoCell is a flexible system that will contour to the subgrade of a slope, reducing preparation time. When filled with vegetated soil or rock, the system is permeable – reducing water runoff.
YaKai™ GeoCell can be installed on slopes as steep as 60 degrees and on channels with flow velocities greater than 25 ft/s (7.6 m/s), depending on infill material. Angular rock is used for velocities up to 10 ft/s (3 m/s), vegetated soil up to 20 ft/s (6 m/s) and concrete for velocities greater than 20 ft/s (6 m/s).
YaKai™ GeoCell can be used for both cut and fill applications on retaining walls. The flexible HDPE panels are custom made to the front to back dimensions required by the project engineer. GeoCell can be easily installed around curves, pipes or other structures. The panels are constructed with the front facing strip colored green or tan to blend in with the surroundings. GeoCell panels can be stacked to create a 90 degree wall, or they can be stair stepped at every layer to create exposed cell for vegetation. BaseLok™ GeoCell is the perfect green wall solution.
Benefit
Cases
