Search the whole station HDPE Sheet

Dock Fender
Dock Fender
Dock Fender
Dock Fender
Dock Fender
Dock Fender
Dock Fender
Dock Fender
Dock Fender
Dock Fender

dock fender

high quality customized uhmwpe marine fender face pad/virgin hdpe marine fender panel/dock uhmwpe plastic board
  • MaterialPE,UHMWPE/HDPE
  • SizeCustomized Size
  • Molecular weight3million -10million
  • bearingbore bearing
  • Shaperound, square ,rectangle
  • Colorwhite,black, yellow,orange,etc
  • Crane capacity 10–200tons
  • Water absorptionUnder 0.01%
*
Sending
Succeed
Failed
Email error
Phone number error

Detailed Information:

Standard Size of Round Outrigger Pads

DimensionLoad CapacityWeight
800*50 mm35 t25kg
800*60 mm40 t30kg
900*50 mm45 t30kg
900*60 mm50 t35kg
1000*50 mm50 t29.25kg
1000*60 mm60 t40kg
1000*70 mm75 t50.75kg
1000*80 mm80 t61.5kg
1200*60 mm90 t66.4kg
1200*70 mm110 t77.45kg
1200*80 mm12088.5kg
1500*80 mm160144kg

Standard of Square Outrigger Pads

DimensionLoad CapacityWeight
400*400*40 mm12 t6.3 kg
500*500*40 mm15 t9.9 kg
500*500*50 mm18 t12 kg
600*600*40 mm20 t14.2 kg
600*600×50 mm25 t18 kg
600*600*60 mm30 t21.2 kg
800*800*40 mm35 t25.3 kg
800*800*50 mm40 t31.3 kg
800*800*60 mm45 t38.4 kg
1000*1000*80 mm100 t78 kg
1200*1200*80 mm120 t115 kg
1500*1500*100 mm200 t210 kg

Introduction

This Premium outrigger pad is manufactured in Chinafrom high-quality, heavy duty UHMW polyethylene. It provides outstanding rigidity and strength to outrigger feet when aiding load distribution and retains its shape under extreme vertical pressure, due to the in-built memory technology making it virtually indestructible. 

Featuring a load capacity of up to 180 tonnes and is resistant to water, corrosion and splintering. 

The pad comes with a lifetime warranty which demonstrates the manufacturer’s confidence in the quality of the product and its long-lasting credentials.

Product Benefits:

  • Provides outstanding rigidity and strength to outrigger feet when aiding load distribution
  • Manufactured in China
  • High-quality, heavy duty UMHW polyethylene construction
  • One pad can support up to 180 tonnes
  • Will adapt to the contours of uneven terrain
  • Retains its shape under extreme vertical pressure
  • Can be carried, positioned and stored away with minimal effort
  • Resistant to water, corrosion and splintering
  • Lifetime warranty
  • Rope Handles

Features:

  • Ultra-high molecular weight polyethylene sheet has extremely high impact strength, which is 10 times larger than nylon and polypropylene (PP);
  • The wear resistance of ultra-high molecular weight polyethylene sheet is very excellent. The sand slurry wear test shows that it is several times more wear-resistant than other metals like carbon steel and copper, and 4-5 times more wear-resistant than nylon and PTFE, ranking first among existing plastics.
  •  The friction coefficient of ultra-high molecular weight polyethylene liner is very low. Its dynamic friction coefficient is 0.07 ~ 0.10.
  • High polymer polyethylene sheet can absorb shock and prevent noise;
  • Plastic crane outrigger pads is resistant to chemical corrosion, and can shield atomic radiation. In a certain range of temperature, concentration of many corrosive media (acid, alkali, salt) and organic solvents and other various corrosive media have no alternative to it;
  • Ultra-high molecular polyethylene crane pads is not easy to adhere to foreign matters, and has excellent anti-adhesion properties when sliding;
  • Tasteless, non-toxic, odorless, pollution-free, non-corrosive crane pad colors, which are allowed by the food and drug administration (FDA) and the USDA to be used for direct contact with food and drugs, thus applicable to industries with higher requirements on hygiene conditions such as food and medicine. Can be recycled in the cycle and other plastic compared with good thermal stability and no water imbibition plastic plate, crane products in damp environment, also won’t because of water absorption and make the size change, also does not affect the product precision and wear resistance and mechanical properties, and raw materials do not need to be dry prior to forming processing.
  •  the working temperature range from 265 ℃ to + 265 ℃, low temperature to – 195 ℃ can still maintain good toughness and strength, not brittle.

RELATED PRODUCTS

Refresh

    loading…

    已经是到最后一篇内容了!

    We use cookies to help improve our services, make personal offers, and enhance your experience. If you do not accept optional cookies below, your experience may be affected. If you want to know more, please read the Cookie Policy
    Privacy Policy

    close